Ceramic Coatings Benefits

Benefits of Ceramic Coatings and a Project with Plexiglass

Plexiglas skylights on roof top section of office building

Plexiglass tunnelWhen applied to a thickness of 20 mils, Ceramic Insulation Coatings will reduce the surface temperature 60 to 80 degrees Fahrenheit. Additional coats can decrease the temperature 30 to 40 degrees Fahrenheit. Ceramic Insulation Coatings applied to 20 mils for control of thermal shock and temperature control on this Plexiglass tunnel. (West Edmonton Location, Alberta, Canada)Plexiglas skylights

Ceramic Insulation Coatings Applied to Plexiglas skylights to control expansion and contraction (thermal shock). Saved in excess of $75,000.00. (West Edmonton Location, Alberta, Canada)

Solar Radiation Control: Waterproofs, protects and prevents corrosion 100%.

Ultraviolet Ray Protection: Reduces thermal shock- contraction/expansion.

Acoustical Benefit: Reduces noise.

Surface Temperature Reduction: When applied to a thickness of 20 mils, Ceramic Insulation Coatings will reduce the surface temperature 60 to 80 degrees Fahrenheit. Additional coats can decrease the temperature 30 to 40 degrees Fahrenheit.

Easy Application: Shutting down operations is not required because Ceramic Insulation Coatings can be applied up to 360 degrees Fahrenheit.

 


 

roof_ice_and_snowCeramic Insulation Coatings provides better insulation relating to radiant energy transfer than fiberglass or other conventional systems.

Keeping the summer heat out and the winter heat in! During the winter season in the northern hemisphere, heat naturally, travels from the warmer areas towards the colder outside (ambient) air, or in such instances where the roles are reversed, the same will occur.

Ceramic Insulation Coatings has a low K-Factor, the lack of mass thickness in the coatings, as opposed to the conventional insulation will not be enough to act as a conductive insulator through the substrate to the outside.